How to Setup Ultra Email Notification

Learn how to setup email notification on your Ultra machine

Step 1: Setting up a GMAIL account.

Go to My Account setting page, click on the square and click my account.

Image1

Click Signing in to Google.

Image2

Click Allow less secure apps on.

Image3

IF you are logging in through the web interface.

Step 2: Set Up Email Account in DVR/NVR.

Go to Configuration/Network/Advanced Settings/Email

Follow the picture below, just change the User Name to yours and the Sender’s Address to yours and all other info in the fields as shown. User name and Senders address must be the same. The Receivers email addresses can be anything you want.

Image4

Step 3: Linking Email to Motion

Go to Event/Basic Event/Motion.

Click enable motion for the camera that you want to use. Make sure that the grid is over the field of view were you want motion to be detected. Set the sensitivity at least to the middle setting. The setting all the way to the left is OFF. Next click the Settings button and choose Linkage Action and check off Email.

Image5

If you are logged into the DVR/NVR directly.

Step 2: Set Up Email Account in DVR/NVR.

Go to Menu/Configuration/Network/Email

Make sure the DVR/NVR is fully networked then follow the picture below, just change the User Name to yours and the Senders Address to yours and all other info in the fields as shown. The Receivers email addresses can be anything.

Image6

Step 3: Enable Email Alerts.

Go to Menu/Camera/Motion then enable motion for the camera that you want to use. Make sure that the grid is over the field of view were you want motion to be detected. Set the sensitivity at least to the middle setting. The setting all the way to the left is OFF.

Image8

Next click the Settings button and choose Linkage Action and check off Send

Email then press Apply and then Ok.

Image9

You are now ready to receive Email Notifications.