Overview
Follow these instructions to clean your interactive display screen without damaging its anti-glare coating or other product components. These instructions are also suitable for interactive whiteboards.
Generally, it is best to use only a cloth slightly dampened with distilled water to clean your MyConnectBoard. Never spray liquid directly onto the surface of the board.
You may use the following:
Diluted bleach solution
70-90% isopropyl alcohol
Isopropyl alcohol comes pre diluted and no mixing is required. For concentrations above 90%, dilute accordingly with distilled water.
We recommend using a spray bottle for applying the solution to the cloth to avoid oversaturating it.
Note: Test a small, inconspicuous area before you clean the entire surface.
To clean the screen
You will need two lint free, non-abrasive cloths for this procedure.
- Turn off any connected computers.
- Turn the display off.
- Wipe all surfaces with the first dry lint-free, non-abrasive cloth to remove dust and debris.
- Gently spray a small amount of the water or cleaning solution on the second cloth.
Note: Do not oversaturate the cloth to the point it is dripping. - Wipe the screen with the dampened cloth.
- After wiping the screen, wipe off the remaining surfaces that one can normally touch, such as the frame, pens, and other accessories.
CAUTION
- Do not use permanent or dry-erase markers on the screen. If dry-erase markers are used on the screen, remove the ink as soon as possible with a lint-free, non abrasive cloth.
- Do not rub the screen with dense or rough material.
- Do not apply pressure to the screen.
- Do not use cleaning solutions or glass cleaners on the screen except as noted previous, because they can damage or discolor the screen.
- Do not use pre-moistened wipes.
- Refer to the cleanser’s packaging for safe handling instructions.