Some information may vary depending on materials used.
- Setup for 3.5mm audio input:
- Connect both the Right and Left Channel wires into the 'micout+' port on the green terminal block.
- Connect the ground wire (may be a bare wire) into the 'micout-' port on the green terminal block.
- Connect 3.5mm jack to the audio in wire on the camera.
- Setup for 3.5mm audio output:
- Connect the Right and Left Channel wires into the 'SPKIN+' port on the green terminal block.
- Connect the ground wire (may be a bare wire) into the 'SPKIN-' port on the green terminal block.
- Connect 3.5mm jack to the audio out wire on the camera.
- Setup for RCA audio input:
- Connect the positive wire into the 'micout+' port on the green terminal block.
- Connect the ground wire (may be a bare wire) into the 'micout-' port on the green terminal block.
- Connect RCA jack to the audio in wire on the camera
- Setup for RCA audio output:
- Connect the positive wire into the 'SPKIN+' port on the green terminal block.
- Connect the ground wire (may be a bare wire) into the 'SPKIN-' port on the green terminal block.
- Connect the RCA jack to the audio out wire on the camera.
- Setup for Phoenix audio input (some cameras may have a single shared ground port):
- Connect a bare wire from 'micout+' on the green terminal block to the 'audio in+' port on the camera.
- Connect a bare wire from 'micout-' on the green terminal block to the appropriate 'ground' port on the camera
- Setup for Phoenix audio output (some cameras may have a single shared ground port):
- Connect a bare wire from 'SKPIN+' on the green terminal block to the 'audio out+' port on the camera.
- Connect a bare wire from 'SKPIN-' on the green terminal block to the 'ground' port on the camera.
