Central Management Software (CMS) for use with Paramont DVRs, NVRs, and IP Cameras (IPCs).

- Default of 256 channels, additional channel licenses can be purchased
- You cannot have Lite and Standard versions installed on same PC

PC Compatibility: This software is designed for PC use only. Both the Server and Client components must be installed for the software to operate.

Deployment Options

Paramont CMS supports two deployment configurations:

1. Client/Server (C/S) Setup: Install and run the Server on a dedicated PC. Other PCs on the network can install and run the Client to connect to and access the central Server.

2. Standalone Setup: Install and run both the Server and Client on a single PC, allowing the software to operate independently without requiring a separate server computer.

Version: v2.1.4.60205

Please Note:
You MUST install both the server & client (both files are in a single download).
Default Server Address: 127.0.0.1
User Name: admin
Password: 123456
When upgrading the CLIENT, it will prompt you to uninstall, this is normal, there will be a message to keep the database or not, if you want to KEEP the database, DO NOT CHECK.

Suggested Components Starting Point

• Intel Core i7-7700K or higher
  Motherboard designed for gaming
• 16GB Memory
• 250GB SSD or higher + a large capacity Hard drive such as a 2TB
• Video Card with 16GB Additional Memory

Central Management Software (CMS) for use with Paramont DVRs, NVRs, and IP Cameras (IPCs).

- Maximum of 256 channels, you cannot exceed this channel limit
- You cannot have Lite and Standard versions installed on same PC

PC Compatibility: This software is designed for PC use only. This is a single executable file download

Deployment Options

Paramont CMS supports two deployment configurations:

Version: v2.1.4.60205

Please Note:
User Name: admin
Password: 123456
*You will be forced to change the default password, please make sure to save. Filling out the security questions will help in case it is forgotten.

Suggested Components Starting Point

• Intel Core i5 or higher
• 8GB Memory
• 250GB SSD or higher + a large capacity Hard drive such as a 2TB
• Video Card with 8GB Additional Memory
• A power supply that can handle these components in your computer

This software is designed for use with Paramont Enterprise and Mini Server 2 systems.

Please Note: This is a Client-only software download. It is intended for installation on additional PCs connected to the network, allowing users to remotely connect to and access the Enterprise or Mini Server 2 system.

Version: v2.1.4.60205

Download Client Software Here

Version: v2.1.4.60811

Download Client Software Here

This software is designed for use with MID Server system.

Please Note: This is a Client-only software download. It is intended for installation on additional PCs connected to the network, allowing users to remotely connect to and access the MID Server system.

Version: v2.1.4.50826

Download Client Software Here

The FaceCut Tool is designed for use with the PAR-P2TEMPTABLET. The purpose of the tool is for uploading facial recognition images. The tablet requires Facial recognition photos to be a specific size. Using the tool, you can take a picture with a camera or your phone and input your photos to resize them appropriately. Please download the step-by-step instructions below.

Download Instruction Here
Download FaceCut Tool Here (Version 1.0)

This is the free IP utility for the Paramont Series for those using a PC. It is used to find devices (DVR/NVR, IP cams) on the network and change the IP info (IP Address, Sub-Net, Default Gateway) of those devices. Version 3.0.2.21 (build 20250815)

Download IP Tool Here

This is the free IP utility for the Paramont Series for those using a PC. It is used to find IP Cameras on the network and change the IP info (IP Address, Sub-Net, Default Gateway) of those devices. 
Download IP Manager Utility Here

This is the free IP utility for the Paramont Series for those using a PC. It is used to find IP Cameras on the network and change the IP info (IP Address, Sub-Net, Default Gateway) of those devices.

Download IP Tool Here (Version 1.9.9)

This is the free player for use with proprietary files from Paramont DVRs and NVRs. RPAS Player_v1.0.0.50624BETA11
Download RPAS Player Here

This is the free IP utility for PAR-P5DRIR28NH-HDMI/PAR-P2PVMCAM10/PAR-P2PVMCAM27 for those using a PC. It is used to find PAR-P5DRIR28NH-HDMI/PAR-P2PVMCAM10/PAR-P2PVMCAM27 on the network and change the IP info (IP Address, Sub-Net, Default Gateway) of these cameras.

Download Config Tool Here (V2.4.0.0)

IP Manager for Paramont IPC: Can use to batch upgrade and batch password change.
v1.1.0.15 build 20250905

Download IP Manager Here

Paramont SD Card Player, v1.0.5.8 "Fixed Exporting Issue"

Download SD Card Player Here 

IPCam Search Used for:

• PAR-P2DVC2

• ULT-P2SQPOEP37NHT

• ULT-P2SQPOEP37NH

• ULT-P2SQPOE36NH

• ULT-P2SQPOE21NH

• ULT-P2CRB36NH

Download IPCam Search Here 

Version: 3.1.1.16 build 261105
Download IP Tool Here