Secure Series Firmware
Setting up the SEC-BODYTEMPCAM1 & Calibrator
- Firmware for SEC-BODYTEMPCAM1
-
Please Note: After upgrading this firmware, it is REQUIRED to default your camera. You will NEED to RESET and RECALIBRATE the camera. Please make sure you are familiar with doing this. If you are NOT familiar with recalibrating the camera, please upgrade it when the tech support team is available. Monday - Friday 8:30am - 5pm EST
Version 24.0.2 Build 20201022
Firmware can be downloaded below. Adds "Mode 3" under Display Trace Info. YOU WILL NEED TO DEFAULT AND RECALIBRATE THE CAMERA. SEE NOTE ABOVE.
- Firmware for SEC-BODYTEMPCAM2
-
Please Note: After upgrading this firmware, it is REQUIRED to default your camera. You will NEED to RESET and RECALIBRATE the camera. Please make sure you are familiar with doing this. If you are NOT familiar with recalibrating the camera, please upgrade it when the tech support team is available. Monday - Friday 8:30am - 5pm ESTVersion 3.1.1 Build 20210106Firmware can be downloaded below. Fixes snapshot in email if using with SN1A-32X16TF NVR. YOU WILL NEED TO RESET AND RECALIBRATE THE CAMERA. See note above.