Warranty_1400x423-01

 

Warranty Information + InVid Tech's Terms & Conditions

Below find warranty information for InVid Tech's products. Select the product type and find the product and/or series listed within. Select products may have limited warranties. For questions on any specific product please contact the RMA Dept. If you wish to return a product please fill out the online Return Authorization Form.

Accessories

Master Power Supplies
1-Year Warranty

IPS-DCR18-18-1UL Power Supply
1-Year 

IPS-1230-D18 Power Supply 
1-Year 

Plug-in Power Supplies
1-Year

Solar Powered Security Lighting
1-Year

Switches
All switches that are not Long Range (LR) Models 
1-Year

Long Range (LR) Models
1-Year

Servers

PS1A-MINISERVER

3-Years

PS1A-ENTERPRISE

3-Years

PS1A-DECODER

3-Years

PS1A-STORAGESERVER

3-Years

Air Purifier

Air Purifier 
Aura Air
1-Year

Cameras

Standard IP Cameras
Elevate, Paramont, Vision, Ultra Series
3-Years

Standard HD Analog Cameras
Elevate, Paramont & Ultra Series
3-Years 

Covert Cameras
Paramont & Ultra Series
2-Years

Stainless Steel Cameras
Paramont & Ultra Series
1-Year

Monitors

Monitors

IMHD-10N/10PVM/17AN/20HVBN/22HVB/22HVBPOE/22HVF/24HDLOOP/24HVBN/24POE/32HVBN/43HVBN/7PVM

IMHD4K-28

3-Year

IMHD4K-32/43N/55N/85

1-Year

Unless noted above all monitors 

1-Year

MyConnect Monitors & Accessories

MyConnect Monitors
1-Year Warranty

MyConnect Products & Accessories
1-Year Warranty

Connect Series Accessories

1-Year Warranty

PTZs

PTZs
Paramont & Ultra Series
2-Years

Vision Series
1-Year

Mini PTZ
PAR-ALLDRPTZXIR2808
2-Years

Recorders

NVRs
Elevate, Paramont, Ultra Series
3-Years

Vision Series
2-Years

Secure Series NVRs & Hard Drives
2-Years

DVRs 
Elevate, Paramont & Ultra Series 
3-Years

Temperature Products

Secure Series
Camera & Calibrator 
1-Year

Temperature Tablet
Paramont Series
2-Years

Terms & Conditions

InVid Tech RMA Terms & Conditions
All products returned to InVid Tech require a pre-approved Return Merchandise Authorization (RMA) number. Please contact the InVid Tech RMA department for and RMA number. RMA numbers are for single use only, and cannot be used again for another return. Shipments without a RMA number marked clearly on the outer packaging or label may be refused. RMA numbers are valid for 15 days. After that, you must call for a new RMA number. All RMA’s should go through proper channels. Products purchased through a distributor should have the RMA go back through the distribution channel. Only with prior approval will InVid Tech accept RMA’s directly from the dealer or end-user. When shipping directly to us, you must put the name of the distributor from where you purchased the product. Please be as specific as possible with the reason for return. Otherwise, we may not be able to troubleshoot the exact problem. If there is no reason for return or the description is vague, only the basic tests will be performed such as video, power, image quality, infrared (if applicable), and it will be returned to the customer in the same condition it was received. InVid Tech is not liable for replacing missing screws or accessories. The product will be returned exactly as received. The warranty for repaired products is 180 days from the time it shipped from InVid Tech.

SHIPPING
The Sender is liable for any shipping charges (plus any duties/tax for international shipments) sent to InVid Tech Returns Dept. InVid Tech does not issue Return labels/Call tags. Products returned to InVid Tech via C.O.D or Freight Collect will be automatically refused. Customer will be responsible for return shipment if the products are found non-defective. Written on the RMA form must be the part number, serial number, and the reason for return. If the serial number is not listed, the product will be handled as an “out of warranty” product. InVid Tech will pay the ground shipping charge when returning the repaired or replaced unit to the customer; any other method of shipment is the responsibility of the customer. InVid Tech is not responsible for returns that have been damaged during transit due to improper packaging by the customer. 

WARRANTY REPAIRS
InVid Tech will repair or replace units that are still under warranty free of charge. InVid Tech may use refurbished units or parts to repair/replace the RMA units. Custom made products are non-refundable. If the custom product is defective, we will repair or replace the product per our discretion.

NON-WARRANTY REPAIRS
There is a minimum labor charge of $50 plus the cost of parts to repair out of warranty products. InVid Tech will notify the customer with a quote. If the customer declines the repair, InVid Tech will ship the product back to the customer un-repaired or disposed of at our facility with customer’s approval. All charges are to be paid by the customer’s current terms. If the customer does not have terms, all charges must be paid in advance by credit card.

CREDIT RETURNS
InVid Tech will not issue credit for any used or installed products. Credit will be issued only for return product(s) and not the shipping cost. Distributors that issue advanced replacement to their customers should do so at their own risk. Credit is not applicable to the following products; customized and/or OEM products, special orders including non-stocked items such as PAL/CCIR models, built-in audio models, discontinued or obsolete products, used or demo/sample/installed products, accessories that include, and not limited to, power adapters, cables, voltage converters, and lenses.

There is a twenty percent restocking fee (25%) for all credit returns. Credit returns for wrong orders, customers that are not satisfied, stock rotation, changed mind, refused packages, and any other reasons not related to manufacturers defect or fault, are subject to the 25% restocking fee. Credit must be pre-approved and is not guaranteed until the product is received, inspected and approved by the RMA Dept and that it meets the credit requirements. Products must be returned within 30 days of purchase and returned in original condition and packaging to be approved for credit. After 30 days but before 90 days, credit returns will be issued house credit.

ADVANCED REPLACEMENT
Advanced replacement requires prior authorization from the RMA dept. Advanced replacement products can be new or refurbished depending on availability. Advanced replacement shipments will be prepaid by InVid Tech for ground shipment. Products that are received after the advanced replacement has been made and are found to be in working condition, or not found to be manufacturers defect in material or workmanship, the customer is responsible to pay for the advanced replacement and pay for the shipment back to the customer.

DOA
If the product is not working out of the box, you must contact your distributor or InVid Tech within ten days of receipt. Once determined that product is DOA by InVid Tech, a replacement will be shipped out on our account upon receipt of the DOA unit.

WARRANTY EXCEPTIONS
Warranty is void when caused by improper installation, abuse, negligence, accidents, vandalism, missing serial number label, improper use of power, any unauthorized tampering, repairs, or modifications, acts of nature such as earthquakes, tornadoes, floods, lightning strikes and other acts of God.

DEAD PIXEL POLICY
For dead pixel warranty, please refer to our RMA department for more information.

STOCK ROTATION
For stock rotation terms and conditions, please refer to our stock rotation policy for more information.

InVid Tech, reserves the right to make changes to improve our products at any time without notice; we are not responsible for misprints.